A System Administrator can add a new IP address to the Windows Server hosting SmarterMail to provide additional connectivity or to facilitate specific network configurations. This process involves modifying the Windows Server network adapter settings.
Important: Adding or changing an IP address on a live server can cause a temporary loss of connectivity. Perform this action during a scheduled maintenance window.
Before you begin
You will need:
System Administrator access to the Windows Server
Administrative privileges on the Windows operating system
The new IP address and subnet mask details provided by your network administrator
Adding an IP Address to the Windows Server
Open the Control Panel on the Windows Server.
Navigate to Network and Internet > Network Connections.
Identify the network adapter used by the SmarterMail server.
Right-click the adapter and select Properties.
Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
Select Use the following IP address.
Enter the new IP address, subnet mask, and default gateway.
Enter the DNS server addresses provided by your network administrator.
Click OK on the IP properties window.
Click OK on the properties window to apply the changes.
Confirm the result
The Windows Server will now recognize the additional or updated IP address.
You can verify the change by opening a command prompt and typing
ipconfig. The output should display the new IP address assigned to the network adapter.
Limitations
This procedure only adds or modifies the IP address at the Windows OS level. After adding a new IP address to the server, you must still configure SmarterMail to bind to that specific IP if you intend to use it for SmarterMail services.
