Configure abuse detection rules for SMTP authentication failures in SmarterMail to identify and mitigate potential brute-force attacks. This configuration allows the system to automatically take action when a high volume of failed login attempts occurs over SMTP.
Before you begin
You will need:
System Administrator access to the SmarterMail management interface.
Configure SMTP Authentication Failure Rules
Log in to the SmarterMail administration interface.
Navigate to Settings > Security > Abuse Prevention.
Locate the SMTP Authentication Failures section.
Configure the following settings:
Threshold: Enter the number of failed attempts allowed before the system triggers an action.
Time Period: Define the window of time (in minutes) during which the threshold must be met.
Action: Select the action to take when the threshold is exceeded (e.g., block the IP address or notify the administrator).
Click Save.
Confirm the result
The system will now monitor SMTP authentication attempts against the defined threshold.
You can verify the active rules by navigating back to Settings > Security > Abuse Prevention.
If a valid IP is blocked by mistake
If a legitimate user is blocked due to a high volume of failed attempts (often caused by a misconfigured email client), you can manually unblock the IP.
Navigate to Settings > Security > Intrusion Detection.
Locate the Blocked IP Addresses list.
Find the specific IP address and select Remove or Unblock.
Advise the user to verify their email client's SMTP credentials and port settings.
Limitations
These rules apply specifically to SMTP authentication attempts. They do not affect other types of login failures, such as those occurring via Webmail or other protocols, unless those specific sections are also configured in the Abuse Prevention menu.
