Configure Intrusion Detection rules in SmarterMail to identify and mitigate potential security threats, such as brute-force login attempts or unauthorized access patterns. This task is performed by a System Administrator to enhance the security of the SmarterMail environment.
Before you begin
You will need:
System Administrator access to the SmarterMail management interface.
Configure Intrusion Detection Rules
Log in to the SmarterMail administration interface.
Navigate to Security > Intrusion Detection.
Select the rule you wish to modify or create a new rule.
Configure the specific criteria for the rule, such as the number of failed login attempts or the frequency of requests from a single IP address.
Select Save or Update to apply the changes.
Review and Remove a Blocked IP Address From Intrusion Detection
If an IP address is flagged and blocked by the system, you can review and remove the block to restore access for a legitimate user.
Navigate to Security > Intrusion Detection.
Locate the Blocked IP Addresses section or list.
Identify the IP address you wish to unblock.
Select the action to remove or unblock the IP.
Select Save or Update.
Add a Trusted IP Address to Intrusion Detection
To prevent legitimate traffic from being flagged or blocked by the Intrusion Detection system, you can add specific IP addresses to a trusted list.
Navigate to Security > Intrusion Detection.
Locate the Trusted IP Addresses section.
Enter the IP address of the trusted source.
Select Save or Update.
Confirm the result
The updated rules will be active immediately upon saving.
Blocked IP addresses will no longer be restricted if removed from the blocked list.
Trusted IP addresses will bypass the automated blocks defined in the Intrusion Detection rules.
Troubleshooting
A trusted IP address is still being blocked. Verify that the IP address entered in the trusted list is the actual public IP of the source. If the source is behind a proxy or a load balancer, ensure the correct originating IP is recorded.
A legitimate user is blocked after several failed login attempts. Check the Intrusion Detection page to see if the user's IP address appears in the blocked list. If it does, remove the IP from the blocked list to restore their access.
