Skip to main content

How to Configure Per-Domain Outbound Message Throttling

Configure per-domain outbound message throttling in SmarterMail to limit the number of emails a specific domain can send within a set timeframe.

This prevents a single compromised account or a misconfigured application from exhausting your server's reputation or sending excessive volumes of mail.

Before you begin

You will need:

  • System Administrator access to the SmarterMail management interface.

  • The specific domain name you wish to configure.

Configure outbound message throttling

  1. Log in to the SmarterMail administration interface.

  2. Navigate to Domains.

  3. Select the domain you want to configure.

  4. Open the domain's Configuration settings.

  5. Locate the Priority and Throttling section.

  6. Under Throttling, configure the following settings as needed:

    • Outbound Messages per Hour: Specify the maximum number of messages the domain can send per hour.

    • Message Throttling Action: Select what SmarterMail should do when the message limit is reached:

      • None – Do not enforce the message limit.

      • Delay – Accept messages into the spool and gradually deliver them.

      • Reject – Reject additional messages until the throttling window resets.

    • Outbound Bandwidth MB per Hour: Specify the maximum amount of outbound bandwidth the domain can use per hour.

    • Bandwidth Throttling Action: Select the action SmarterMail should take when the bandwidth limit is reached.

    • Bounces Received per Hour: If required, configure the maximum number of bounces the domain can receive per hour.

    • Bounces Throttling Action: Select the action to take when the bounce threshold is reached.

  7. Click Save to apply the changes.

Confirm the result

  • Return to the domain's Priority and Throttling settings and verify that the configured values are saved.

  • Send outbound messages from the domain and verify that the configured throttling limits are enforced when the threshold is reached.

  • If the throttling action is set to Delay, messages will remain in the spool and be delivered gradually.

  • If the throttling action is set to Reject, additional outbound messages will be rejected after the configured threshold is reached until the throttling window resets.

Limitations

This setting applies only to the specific domain selected. Other domains on the same SmarterMail server will not be affected by this limit. This feature is used to mitigate the impact of spam or "mail bombs" originating from a single domain.

Did this answer your question?