Skip to main content

How to Configure POP Retrieval for an External Mailbox

This procedure allows a System Administrator to configure SmarterMail to retrieve emails from an external mail server into a local SmarterMail mailbox using the POP protocol. This feature is available only on specific SmarterMail plans and configurations.

This procedure allows a System Administrator to configure SmarterMail to retrieve emails from an external mail server into a local SmarterMail mailbox using the POP protocol. This feature is available only on specific SmarterMail plans and configurations.

Important: This feature is only available on specific SmarterMail plans and configurations. Verify your plan's capabilities before attempting to configure external retrieval.

Before you begin

You will need:

  • System Administrator access to the SmarterMail server.

  • The credentials (username and password) for the external mailbox.

  • The hostname or IP address of the external mail server.

  • The port number for the external server (typically 110 for non-encrypted or 995 for SSL).

Configure POP Retrieval

  1. Log in to the SmarterMail administration interface.

  2. Navigate to Domains > Manage Domains.

  3. Select the domain that will host the local mailbox.

  4. Select Mailbox Management > Add Mailbox.

  5. Enter the mailbox details, including the email address and password.

  6. Select Advanced Options or the specific Remote Retrieval section (the exact location may vary based on your SmarterMail version).

  7. Enter the Remote Server details:

    • Remote Host: Enter the hostname or IP address of the external server (e.g., pop.example.com).

    • Port: Enter the port number (e.g., 995).

    • Encryption: Select the appropriate security protocol (e.g., SSL or TLS).

  8. Enter the Remote Credentials (the username and password for the external account).

  9. Select Save or Update to apply the settings.

Confirm the result

  • The SmarterMail system will attempt to connect to the remote server and fetch the mail.

  • You can verify success by logging into the local mailbox and checking for the arrival of emails from the external source.

  • Check the SmarterMail Spool or System Logs to ensure no "Authentication Failed" or "Connection Timed Out" errors appear for the remote retrieval task.

If connection errors occur

If the system cannot retrieve mail, check the following:

  • Credentials: Verify that the remote username and password are correct.

  • Firewall: Ensure the SmarterMail server's IP address is permitted to connect to the remote server on the specified port.

  • DNS: Ensure the remote host address is resolvable from the SmarterMail server.

Limitations

  • This feature requires specific SmarterMail features to be enabled on your account.

  • This configuration only supports the POP protocol; it does not support IMAP for remote retrieval.

  • The local mailbox will only receive mail from the remote server; it will not be able to send mail as the remote user unless a separate "Send As" configuration is performed.

Did this answer your question?