Skip to main content

How to Configure SMTP on Port 25 in SmarterMail

Configure SmarterMail to accept or send mail via SMTP on port 25. This procedure allows you to manage how the SmarterMail system handles standard SMTP traffic, typically used for local mail delivery or relaying.

Configure SmarterMail to accept or send mail via SMTP on port 25. This procedure allows you to manage how the SmarterMail system handles standard SMTP traffic, typically used for local mail delivery or relaying.

Before you begin

You will need:

  • System Administrator access to SmarterMail

  • Access to the server's firewall or network security settings to ensure port 25 is open

Configure SMTP on Port 25

  1. Log in to the SmarterMail administration interface.

  2. Navigate to Settings > Mail Settings > SMTP Settings.

  3. Locate the SMTP Port 25 section.

  4. Select the desired configuration for port 25 (e.g., enabling it for local delivery or as a relay).

  5. If applicable, enter the required IP addresses or ranges allowed to use this port.

  6. Click Save.

Confirm the result

  • The settings are saved in the SmarterMail administration interface.

  • You can verify the configuration by checking the SmarterMail logs to ensure mail is being accepted or processed on port 25 as expected.

Troubleshooting

If mail is not being accepted on port 25:

  1. Verify that the Windows Firewall (or any third-party firewall) allows inbound traffic on port 25.

  2. Check the SmarterMail logs to see if the connection is being rejected by the application or by the network.

  3. Ensure the correct IP addresses are permitted in the SmarterMail SMTP settings.

Limitations

This procedure only configures the SmarterMail application's handling of port 25. It does not automatically open ports on the underlying Windows Server or any external firewalls. You must ensure the network infrastructure allows traffic on port 25 to reach the server.

Did this answer your question?