A message that remains in the "Waiting" status in the SmarterMail spool is typically held because the system is waiting for a specific condition to be met, such as a connection to the destination server or a required internal action. This guide helps a System Administrator identify the cause of the delay and resolve the issue.
Before you begin
You will need:
System Administrator access to the SmarterMail management interface.
The Message ID or the specific sender/recipient details of the delayed message.
Check the SmarterMail Spool Overview
The Spool Overview provides an initial look at why messages are not moving through the system.
Log in to the SmarterMail administration interface.
Navigate to Tools > Spool.
Review the Spool Overview page.
Identify the messages in the Waiting status.
Note the "Reason" or "Status" column for the specific message.
If the reason is listed as "Connection Failed" or "DNS Failure," the issue is likely with the destination server or the local network configuration.
Investigate the Specific Message
To determine why a specific message is stuck, you must view its individual details.
In the Spuro (or Spool) section, locate the specific message.
Select the message to open its details.
Review the Status and Log fields.
Identify the specific error code or message description provided in the logs.
Troubleshoot Common Causes
Depending on the information gathered in the previous steps, perform the following actions:
Connection Failures
If the logs indicate a connection failure to the remote server:
Verify the recipient's email address is correct.
Check if the destination server's IP address is blocked by a local firewall or a security filter.
Verify that the destination server is accepting connections on the standard mail ports (e.g., 25, 465, or 587).
DNS Issues
If the logs indicate a DNS failure:
Verify that the destination domain has valid MX records.
Ensure the SmarterMail server can resolve the destination domain's hostname.
Check if the issue is specific to one domain or all outgoing mail.
Internal Routing Rules
If the message is stuck due to a routing rule:
Navigate to Tools > Mail Routing.
Review the rules to ensure the message is not being caught in a loop or directed to an invalid gateway.
Confirm the result
The message will successfully move from "Waiting" to "Delivered" or "Failed" (if the destination is unreachable) once the underlying issue is resolved.
The message status changes from Waiting to Delivered in the Spool.
The message is no longer visible in the Waiting list in the Spool Overview.
Limitations
This procedure does not resolve issues caused by the recipient's mail server rejecting the message after a successful connection; those issues will appear as "Rejected" or "Bounced" rather than "Waiting."
If the message is stuck due to a local hardware or network outage, SmarterMail cannot move the message until the connection is restored.
