Skip to main content

How to Manage Windows Firewall Rules in Windows Control Panel

Server administrators can manage Windows Firewall rules through the Windows Control Panel (WCP) to control inbound and outbound traffic to a server. This procedure allows you to permit or block specific ports, protocols, or applications.

Server administrators can manage Windows Firewall rules through the Windows Control Panel (WCP) to control inbound and outbound traffic to a server. This procedure allows you to permit or block specific ports, protocols, or applications.

Important: This feature is only available on Hostek plans that include access to the Windows Control Panel.

Before you begin

You will need:

  • Server Administrator permissions

  • A Hostek account with Windows Control Panel (WCP) access

Manage Windows Firewall Rules

  1. Log in to the Windows Control Panel.

  2. Navigate to Tools > Security Center.

  3. Click Firewall Settings (or Windows Firewall depending on the OS version).

  4. Select Advanced Settings to open the Windows Defender Firewall with Advanced Security console.

  5. In the left pane, select Inbound Rules to manage incoming traffic or Outbound Rules to manage outgoing traffic.

  6. To add a new rule, select New Rule... from the Actions pane.

  7. Follow the wizard to select the rule type (Program, Port, or Custom), define the specific parameters, and choose the action (Allow or Block).

  8. Provide a name for the rule and click Finish.

Warning: Incorrectly configuring firewall rules can result in a loss of connectivity to the server or other services. Ensure you have the correct port numbers and protocols before applying a rule that blocks traffic.

Confirm the result

  • The new rule will appear in the list of Inbound or Outed Rules.

  • The status icon for the rule will indicate whether it is enabled (green checkmark) or disabled.

  • You can verify the rule's effect by attempting to connect to the specified port using a tool like Telnet or a port scanner.

Limitations

  • This procedure only manages rules within the Windows Firewall. It does not manage hardware firewalls or external network security layers.

  • Changes to firewall rules may take a few seconds to propagate across the system.

  • If you are troubleshooting a connection issue, ensure the port is also open on any external firewalls or security appliances.

Did this answer your question?