Skip to main content

How to Start, Stop, or Restart a Hostek Windows Server From Windows Control Panel

Server administrators can use the Windows Control Panel (WCP) to perform power actions on a Hostek Windows server. This procedure allows you to restart a server to apply configuration changes, stop a server for maintenance, or start a server after it...

Server administrators can use the Windows Control Panel (WCP) to perform power actions on a Hostek Windows server. This procedure allows you to restart a server to apply configuration changes, stop a server for maintenance, or start a server after it has been powered down.

Important: This feature is only available on Hostek plans that include a dedicated Windows server.

Before you begin

You will need:

  • Server Administrator privileges

  • Access to the Windows Control Panel (WCP)

Powering the server via Windows Control Panel

  1. Log in to the Windows Control Panel.

  2. Navigate to Server Management > Server Status.

  3. Locate the server you wish to manage in the list.

  4. Select the action you wish to perform:

    • To restart the server, select Restart.

    • To shut down the server, select Stop.

    • To power on a stopped server, select Start.

  5. Confirm the action when prompted.

Warning: Restarting or stopping a server will cause all hosted websites, applications, and services to become unavailable during the process. Ensure any necessary maintenance windows are communicated to affected users before proceeding.

Confirm the result

  • Restart: The server will reboot. You can verify success by checking the Server Status page; the status should change from "Restarting" to "Running" once the boot process is complete.

  • Stop: The server status will change to "Stopped."

  • Start: The server status will change from "Stopped" to "Running."

Limitations

  • The time required for a server to restart or start depends on the hardware resources and the number of services running on the server.

  • If a server is in a "Starting" or "Stopping" state, the options to perform other actions may be grayed out until the process completes.

Did this answer your question?