Skip to main content

How to Add a Remote Backup Destination in WHM

Add a remote backup destination in WHM to store your cPanel account backups on a separate server or storage device. This ensures that your data remains available even if the primary server experiences hardware failure or local storage issues.

Add a remote backup destination in WHM to store your cPanel account backups on a separate server or storage device. This ensures that your data remains available even if the primary server experiences hardware failure or local storage issues.

Before you begin

You will need:

  • Server Administrator access to WHM

  • The IP address or hostname of the remote destination

  • The credentials (username and password) for the remote destination

  • A valid SSH key or the ability to configure the remote server to accept the connection

Add a remote backup destination

  1. Log in to WHM.

  2. Navigate to Server Configuration > Backup Configuration > Add Remote Backup Destination.

  3. Enter a descriptive name for the destination (e.g., Offsite_Storage_01).

  4. Enter the Remote Destination (the IP address or hostname of the remote server).

  5. Enter the Remote Username and Remote Password for the destination.

  6. Select the Remote Path where the backups should be stored on the remote server.

  7. Select the Backup Type (e.g., FTP, SFTP, or local path if the remote is mounted via FUSE).

  8. Click Save.

Confirm the result

  • The new destination will appear in the list of available backup destinations.

  • You can verify the connection by selecting the destination and clicking Test Connection (if available in your version) or by checking the remote server to see if a test file was successfully uploaded.

Limitations

  • The remote server must be reachable from the local server's IP address.

  • If using FTP, ensure the remote server's firewall allows connections on the specified port.

  • If using SFTP, ensure the remote server is configured to allow SSH access for the specified user.

  • This process does not automatically move existing backups; it only defines the destination for future backups.

Did this answer your question?