Skip to main content

How to Configure a Domain-Level Outbound Gateway

A domain-level outbound gateway allows you to route all outgoing mail for a specific SmarterMail domain through a designated mail server or relay. This is typically used to route mail through a third-party service, a dedicated outbound IP, or a...

Before you begin

You will need:

  • System Administrator access to SmarterMail

  • The IP address or hostname of the outbound gateway server

  • The port number for the outbound gateway (e.g., 25, 465, or 587)

  • The credentials for the outbound gateway (if authentication is required)

Configure the Domain-Level Outbound Gateway

  1. Log in to SmarterMail as a System Administrator.

  2. Navigate to Administration > Domains.

  3. Select the domain you wish to configure and click Edit.

  4. Scroll to the Outbound Gateway section.

  5. Select the Outbound Gateway option.

  6. Enter the Gateway Hostname or Gateway IP Address.

  7. Enter the Gateway Port.

  8. If the gateway requires authentication, enter the Username and Password in the respective fields.

  9. Click Save.

Confirm the result

  • The domain's configuration page will display the assigned gateway details.

  • Outgoing mail from this domain will now route through the specified gateway.

  • You can verify this by checking the SmarterMail Spool or Delivery Logs to ensure messages are being accepted by the gateway.

Limitations

  • A domain-level outbound gateway applies to all mailboxes within that specific domain.

  • If the gateway is unreachable or rejects the connection, mail for that domain will fail to send.

  • Ensure the gateway's IP address is permitted to send mail for the domain's specific records (SPF, DKIM, and DMARC).

Did this answer your question?