Skip to main content

How to Configure an Incoming Gateway

Configure an incoming gateway in SmarterMail to route mail from a specific source or through a specific path to your SmarterMail environment. This configuration is performed by a System Administrator to manage how the server accepts and processes...

Configure an incoming gateway in SmarterMail to route mail from a specific source or through a specific path to your SmarterMail environment. This configuration is performed by a System Administrator to manage how the server accepts and processes incoming mail.

Before you begin

You will need:

  • System Administrator access to the SmarterMail management interface.

  • The IP address or hostname of the source system providing the mail.

  • Knowledge of the specific mail routing requirements for the incoming traffic.

Configure an Incoming Gateway

  1. Log in to the SmarterMail administration interface.

  2. Navigate to Settings > Gateways.

  3. Select the specific gateway you wish to configure or click Add to create a new one.

  4. Enter the gateway details, including the Description and the Server Address.

  5. Click the checkbox for Inbound Gateway, and define the Inbound Mode or specific Domain Assignments associated with this gateway.

  6. Click Save.

Confirm the result

  • The gateway will appear in the list of active incoming gateways.

  • Incoming mail from the specified source will be correctly routed to the designated SmarterMail domains or mailboxes.

  • You can verify successful delivery by checking the SmarterMail Delivery Logs.

If mail is not being accepted from the gateway

  1. Verify that the source IP address is not blocked by the SmarterMail Intrusion Detection system.

  2. Confirm that the source IP has permission to submit mail to the SmarterMail server.

  3. Check the SmarterMail Spool to see if the message is held in a "Waiting" state.

  4. Review the SMTP Logs to determine if the connection was established and if the message was accepted or rejected by the server.

Limitations

This procedure only configures the internal routing logic of SmarterMail. It does not automatically configure external firewalls or network-level filters; those must be configured independently to allow traffic to reach the SmarterMail server.

Did this answer your question?