Configure an outgoing gateway in SmarterMail to route outbound messages through a specific mail server or relay. This allows a System Administrator to manage outbound mail flow, improve deliverability, or route traffic based on specific criteria.
Before you begin
You will need:
System Administrator access to SmarterMail.
The IP address or hostname of the outgoing mail server.
The port number and authentication details (if required) for the outgoing mail server.
Configure an Outgoing Gateway
Log in to the SmarterMail administration interface.
Navigate to Settings > Gateways.
Click Add Gateway (or the equivalent button to create a new entry).
Enter a descriptive name for the gateway (e.g., "Primary Relay" or "Partner Gateway") and select and Outbound Mode.
Enter the Server Address (IP address or hostname) of the outgoing server.
Enter the Port number.
If the remote server requires authentication, enter the required credentials in the Username and Password fields.
Click Save.
Confirm the result
The new gateway will appear in the list of available outgoing gateways.
You can verify the configuration by attempting to send a test email through the specific gateway if your configuration allows for manual selection.
Limitations
This procedure configures the gateway infrastructure. To apply this gateway to a specific domain or user, you must also configure the relevant routing rules or domain settings.
