Skip to main content

How to Configure SmarterMail as an Inbound Gateway

Configure SmarterMail as an inbound gateway to allow the system to receive and process email from external sources. This configuration is performed by a System Administrator within the SmarterMail administration interface.

Configure SmarterMail as an inbound gateway to allow the system to receive and process email from external sources. This configuration is performed by a System Administrator within the SmarterMail administration interface.

Before you begin

You will need:

  • System Administrator access to the SmarterMail interface.

  • The IP address or hostname of the upstream mail server that will be sending mail to SmarterMail.

Configure SmarterMail as an Inbound Gateway

  1. Log in to the SmarterMail administration interface.

  2. Navigate to Settings > Mail Routing.

  3. Select Inbound Gateway.

  4. Enter the Inbound Gateway IP or Inbound Gateway Hostname.

  5. Select the appropriate Inbound Gateway Port (typically 25).

  6. Click Save.

Confirm the result

  • The SmarterMail system will now accept connections from the specified gateway source.

  • You can verify this by sending a test email from the external source to a local SmarterMail mailbox; the message should appear in the recipient's inbox.

Limitations

This configuration defines the entry point for mail entering the SmarterMail system. If the upstream server is not correctly configured to point to the SmarterMail gateway, mail will not be received. This setting does not affect the routing of mail once it has entered the SmarterMail system.

Did this answer your question?